Equipment / Lifting
Authorized dealerParts elevators.Put the mezzanine to work.
Vertical reciprocating conveyors from Custom Industrial Products move parts, tires and pallets between floors and up to a mezzanine, as a less expensive alternative to a freight elevator. Total Tool helps you pick the series and quotes it with installation.
From a 500 lb box lift to 30,000 lb four-post lifts.

Two questions
Find your lift
The load and the room above the top level narrow it down fast. The site survey confirms the rest.
What are you moving?
Room above the top level
Answer both
Your lift shows here
Pick what you are moving and how much room you have above the top level.
Browse the range
Featured CIP lifts
Pick a lift to add it to your request, or ask about anything not shown here.
Pallet Master family
Pallet liftsBuilt for getting pallets to a second or third level, in standard carriage sizes.
Also in the Pallet Master family
Quoted on requestBox, straddle, cantilever and four-post
Built to the loadFrom the TL-M box lift for parts runs to the FP four-post powerhouse.

The box lift: a compact 3 by 3 ft carriage for lighter loads, up to 500 lb and 16 ft of travel.
Up to 500 lb
The straddle lift, CIP's most versatile: carriages up to 12 by 10 ft and 5,000 to 7,000 lb.
5,000–7,000 lb
The cantilever lift for limited overhead space: carriages up to 8 by 7 ft and up to 5,000 lb.
Low overhead
The four-post powerhouse for oversized, heavy loads: up to 30,000 lb and 36 ft of travel.
Up to 30,000 lbSide by side
Every series at a glance
Specs from CIP's current lineup. Most sizes can be customized.
| Series | Carriage | Travel | Capacity | Best for |
|---|---|---|---|---|
| PM | 4, 5 or 6 ft | Up to 32 ft | Up to 5,000 lb | Pallets to a second or third level |
| PMB | 4, 5 or 6 ft | Up to 25 ft | Up to 3,000 lb | Bolt-together pallet lift |
| PMX | 6 by 8 ft | Up to 25 ft | Up to 3,000 lb | Larger pallets and carts |
| TL-M | 3 by 3 ft | Up to 16 ft | 500 lb | Boxes and parts |
| S / SH | Up to 12 by 10 ft | Up to 32 ft | 5,000–7,000 lb | The most versatile |
| C | Up to 8 by 7 ft | Up to 30 ft | Up to 5,000 lb | Limited overhead |
| FP | 7 by 7 ft and up | Up to 36 ft | Up to 30,000 lb | Oversized and heavy loads |
Why a VRC
Built for material, not passengers
A VRC moves parts and pallets between levels like a freight elevator does, but it is built for materials only. No one rides it.

Use the height you already have
A lift turns an overhead mezzanine into working storage instead of a place parts go to be forgotten.
A lift for the load
From the TL-M box lift for parts runs to the FP four-post for the heaviest loads.
Low ceiling, no problem
The C Series is built for environments with limited overhead space above the top level.
Fits the traffic flow
Load and unload on the same side, opposite sides, straight through or at 90 degrees, depending on the series.
The vendor
Why Total Tool backs CIP

Family run, built in Florida
Custom Industrial Products is a family-run company founded in 1986 that builds its vertical reciprocating conveyors in Melbourne, Florida. Its lifts serve automotive dealerships, warehouses, factories and military and government facilities.
Total Tool helps you choose the series, quotes it with installation and stays on as your local contact, with CIP's inspection and maintenance services behind the lift.
Why buy it here
One local team, from quote to handoff
Total Tool has equipped shops across upstate New York, Vermont, western Massachusetts and Connecticut since 1983. A parts elevator changes how the whole parts department moves, so we plan it around the way yours works.
- Load, levels and overhead checked before choosing a series
- Lift quoted with installation as one number
- Gates and loading sides planned around your parts flow
- Financing, and quotes formatted for purchase orders
Built by

Common questions
Before you buy a parts elevator
Is a VRC the same as a freight elevator?
No. A VRC moves materials between levels the way a freight elevator does, but it is not built to carry people, and no one rides it.
Which series do I need?
It depends on the load and the room above the top level. Boxes and parts suit the TL-M, pallets the PM family, wide loads the S Series, low ceilings the C Series and the heaviest loads the FP. The finder above points you at one.
How high can it go?
Up to 36 ft of travel on the FP Series and up to 32 ft on the PM and S Series.
What if the ceiling above the mezzanine is low?
The C Series cantilever lift is built for environments with limited overhead space.
Can it load from different sides?
Yes. Depending on the series, loads go on and off on the same side, opposite sides, straight through or at a 90 degree angle.
Who inspects and maintains it?
CIP offers lift inspection and maintenance services, and we coordinate them with you.
Request a quote
Tell us what goes up
What you move, how many levels and the height to the top. That is enough to pick the right series.
On your request
Interested in financing? Ask for payment options → · How financing works
Photos of the mezzanine and the floor below help us plan the lift.

