Skip to content
Castleton, NY  /  Mon to Fri, 7:30am to 4:00pm
Upstate NY · VT · W. MA · CT 518.766.7676 info@total-tool.com
Home/Equipment/Exhaust Extraction

Equipment  /  Air & fluid

EUROVENT · MONOXIVENT · DEA WORKYAuthorized dealer

Exhaust extraction.Clear air at the tailpipe.

EuroVent rail systems, Monoxivent hose reels and Dea Worky extraction capture exhaust right at the tailpipe and send it outside, before it reaches the people working the bay. Total Tool lays the system out, installs it and keeps it running.

Cars, heavy trucks and buses. Every layout starts with the bays.

EuroVent sliding crab hose reels in black, blue and red on an overhead rail
Source captureRight at the tailpipe
4–8 in.Hose, cars through heavy trucks
Three brandsEuroVent, Monoxivent, Dea Worky
Every layoutRail, reel, floor or portable

Two questions

Find your exhaust system

The right system depends on how vehicles sit in the bay and how big their exhaust is. Start here, and the site visit confirms it.

How the bays work

The vehicles

Answer both

Your system shows here

Tell us how the bays are used and what you work on, and we will point you at the right setup.

Browse the range

Featured exhaust equipment

Grouped by how the system works. Pick equipment to add it to your request, or ask about anything not shown here.

Telescoping drops

EuroVent

Fixed drops at each bay for shops with traditional spiral duct, with no winches, ropes or pulleys.

Why source capture

Take it at the tailpipe

Carbon monoxide, unburnt hydrocarbons and nitrogen dioxide are hard to detect and cannot be filtered out of shop air. They have to be removed directly, before they spread.

Rails
Fewer outletsone rail serves many bays

Smaller fan, less air loss

EuroVent rail systems position sliding reels and drops where they are needed, so the system needs fewer outlets and a smaller fan.

Reach
18 ft 7 intelescoping hose, extended

Retracts to 8 ft 2 in

Three-piece telescoping hose drops to the tailpipe and packs away overhead, with a breakaway mount if someone pulls too hard.

Hose
Up to 8 in.Monoxivent hose diameters

Sized to the vehicle

High-temperature silicone Nomex or polyester hose in 4, 5, 6 and 8 inch diameters, in lengths up to 44 feet.

Fans
UL approvedEuroVent exhaust fans

American made

EuroVent fans are UL approved for indoor and outdoor installation, sized to the hoses they pull.

Side by side

Rails, reels, drops or portable

Four ways to capture exhaust. The bay layout usually decides it.

Overhead railFixed hose reelsTelescoping dropsPortable
MountsRail behind the baysCeiling, wall or floor, per baySpiral duct, per bayOn wheels
Best forSeveral bays in a rowFixed bays, any vehicle sizeShops with existing spiral ductOccasional use
FlexibilitySlides to any bayOne positionOne positionAnywhere
BrandsEuroVent, Dea WorkyEuroVent, Monoxivent, Dea WorkyEuroVentEuroVent, Monoxivent, Dea Worky

The vendors

Why Total Tool backs these brands

EuroVent

John Dow's exhaust line, and the original overhead rail system: extruded aluminum rail, sliding crab reels, telescoping drops, fixed reels, in-ground, portable and out-the-door systems.

Monoxivent

Source capture specialists since 1953, manufacturing in the USA: spring and motorized hose reels, MONOXIRAIL rail systems, portable eliminators and D-Series blowers.

Dea Worky

Italian-built Worky exhaust extraction from Dea Worky North America: hose reels, rails with touchless arms, floor traps and the Grolly mobile extractor.

Why buy it here

One local team, from quote to handoff

Total Tool has equipped shops across upstate New York, Vermont, western Massachusetts and Connecticut since 1983. Exhaust extraction runs through the ceiling, the walls and the bays, so we plan it with everything else in the building.

  • System laid out around your bays before anything ships
  • Rails, reels, ducting and fans installed by our own crews
  • Fans wired and vented outside
  • Existing EuroVent and Monoxivent systems expanded and serviced
  • Financing, and quotes formatted for purchase orders
EuroVent sliding crab reels and drops on an overhead rail

Common questions

Before you plan exhaust extraction

Why not just ventilate the whole shop?

Exhaust gases like carbon monoxide are hard to detect and cannot be filtered out of the air. Capturing them at the tailpipe removes them before they spread through the building.

Overhead rail or a reel at every bay?

Rails suit several bays in a row, because sliding reels and drops move to whichever bay is working, and fewer outlets means a smaller fan. Fixed reels suit bays where vehicles sit in one spot.

We already have spiral duct. What fits?

Telescoping drops mount to existing spiral duct at each bay, with an adjustable saddle and no winches or pulleys.

Can it handle heavy trucks and buses?

Yes. Heavy-duty reels and sliding crabs take larger hoses, and Monoxivent hose runs up to 8 inches in diameter.

We already have a EuroVent or Monoxivent system. Can you work on it?

Yes. We expand and service existing EuroVent and Monoxivent systems, and install new ones from all three brands.

Is there an option without ducting?

Portable systems roll to the vehicle and vent outside, and the out-the-door system runs fumes straight out the door with no overhead run.

Request a quote

Tell us about the bays

How many bays, how vehicles sit in them, and what you work on. That is enough to lay the system out properly.

01Tell us the bays, the vehicles and what you run today.
02We lay out the rails or reels, ducting and fans as one number.
03Our crews install it and stay on as your local contact.

Interested in financing? Ask for payment options → · How financing works

Photos of the ceiling and bay layout help us plan the ducting.

Request an exhaust quote

Your bay layout and vehicles let us plan the system before we call.

How financing works · We reply within one business day.

Call now Request a quote