Equipment / Hunter Engineering
Authorized dealerWheel alignment.Readings in 70 seconds.
Hunter's HawkEye Elite® captures alignment measurements in 70 seconds with four high-resolution cameras, and WinAlign® software turns them into the fastest adjustment path. Total Tool installs the aligner and the rack together and trains your techs at handoff.
Part of the full Hunter line →

Two questions
Find your alignment setup
The console you choose decides whether static ADAS is an upgrade later or a second purchase. Start here.
Static ADAS calibrations
Your alignment bays
Answer both
Your setup shows here
Tell us where you are with ADAS and how the bays are laid out, and we will point you at a configuration.
Browse the range
Featured alignment equipment
Pick equipment to add it to your request, or ask about configurations not shown here.
Aligners
HawkEye Elite®Four precision cameras, QuickGrip® adaptors and WinAlign® in every configuration.

The camera aligner that set the standard, in cabinet, column, wall and ceiling configurations to fit the bay.
Standard configurations
Scissor, four-post and pit racks. Paired with a HawkEye Elite®, Fully Integrated Alignment automates the small steps.
Up to 60% faster with FIAConfigurations
Quoted on requestQuickGrip® adaptors
Clamps that grip the tire, not the rim
The part of an alignment techs handle most is the part Hunter redesigned: lighter, slimmer and kinder to expensive wheels.
Lighter on every wheel
A durable polymer structure resists drops and needs no electronics or calibration.
Room to work
A slim profile that is easy to work around and suited to narrow bays.
One arm for most jobs
Quick-change arms, with one arm fitting approximately 90 percent of applications.
Wheel-safe by design
Arms hook the tire and a protective ring sits between target and rim. Off-center clamping has no effect on accuracy.
WinAlign® software
The software is where the time goes
WinAlign® carries more than a dozen patented features and Hunter's vehicle information database, updated as new models arrive.
The 70-second alignment check
Hunter's demonstration of a complete alignment check in just over a minute.
Side by side
Which console fits the bay
Hunter offers three console types. The one you pick decides your ADAS path.
| Xpandable console | Standard console | Wall-mounted console | |
|---|---|---|---|
| Mounting | Mobile cabinet | Pairs with a variety of sensor types | Wall or sensor column |
| ADASLink® scan tool | Standard | Optional | Optional |
| Upgrade to Ultimate ADAS® | Yes | No | No |
| Best fit | Alignment now, static ADAS later | Traditional alignment bays | The most compact footprint |
The vendor
Why Total Tool backs Hunter


The alignment standard
HawkEye Elite® and WinAlign® have long defined the performance standard for alignment equipment, with tens of thousands of systems in use worldwide and a database supporting more than 285 million vehicles. Hunter designs and builds them in the USA.
Total Tool is an authorized Hunter dealer. We plan the bay, install the equipment and get your techs trained, with Hunter's own field team and training program behind every machine.
Why buy it here
One local team, from quote to handoff
Total Tool has equipped shops across upstate New York, Vermont, western Massachusetts and Connecticut since 1983. An aligner is only as good as the rack under it, so we plan and install them together.
- Bay planning before anything ships: rack, slab, and room to work around the vehicle
- Aligner and alignment rack installed by the same crew
- Fully Integrated Alignment hookup between rack and console
- Technician training at handoff
- Annual ALI lift inspections for alignment racks and lifts
- Financing, and quotes formatted for purchase orders

Common questions
Before you buy an aligner
How long does a HawkEye Elite alignment check take?
Hunter rates it at 70 seconds to capture alignment measurements, in one trip around the vehicle.
Will the clamps damage expensive wheels?
No. QuickGrip® adaptors grip the tire rather than the rim, with a protective ring between the target and the wheel, so there is no metal-to-metal contact.
Can I add static ADAS calibration later?
Yes, with the HawkEye Elite® X. It keeps its camera sensors, console and ADASLink® scan tool and upgrades to Ultimate ADAS® with a calibration fixture package. The standard console is not upgradeable.
Do I need a new alignment rack?
Not always. Fully Integrated Alignment requires a Hunter rack and aligner working together, and we check your existing rack, slab and bay at the site visit.
Does Hunter handle heavy-duty alignment?
Yes. The HawkEye® XL covers trucks, buses and trailers.
What is the warranty?
Hunter warrants new equipment replacement parts for three years and labor for six months.
Request a quote
Tell us about the alignment bay
How many bays, what you run today, and where you are with ADAS. That is enough to scope it properly.
On your request
Interested in financing? Ask for payment options → · How financing works
Replacing an older Hunter aligner? The model and serial number help.
